Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 89)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
80 / CUSTOMIZING THE WORK SCREEN
Figure 67
Work Screen Configuration Screen
CLEARING DATA ITEM ACCUMULATORS
Some Data Item values can be reset to zero from the Main Work screen.
Accumulator displays (e.g., Area 1 Field, Seed Count, etc.) on the active
screen can be reset to zero by placing a check mark in the box next to the
data item.
• Only accumulators that currently display on the Work screen can be
reset.
• Accumulators are reset independently.
• Accumulators can only be reset when the master/control switch is OFF.
• Once an accumulator has reached its maximum value, it will roll over
to 0.0.
BARGRAPH SETUP
Bar graph setup allows customization of the rows being monitored and
displayed on the Main Work screen. A maximum of 2 lines and 24 columns
can display. Default displays 1 line and 24 columns.