beautypg.com

Operator’s manual – Great Plains DICKEY-john MVT Monitor Operator User Manual

Page 85

background image

OPERATOR’S MANUAL

IntelliAg MVT

11001-1643-201401

76 / GROUND SPEED

IMPLEMENT LIFT

If an implement lift switch is used, the implement lift status must be enabled.
While operating, an alarm condition will occur if the master/control switch is
off for more than 5 to 10 seconds, the implement is down, and ground
speed is greater than zero. An Alarm Cancel button allows the alarm to be
deactivated during the current power cycle. If an implement lift switch is not
required, this function should be disabled.