Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 106)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
OPERATION / 97
SYSTEM ACCUMULATORS
System accumulator data displays the amount of time the system has been
on, the amount of time and area application control has occurred, and the
distance traveled. Data on this screen is for display purposes only - it
cannot be edited.
TIP: The master/control switch must be set to the OFF position to view
System Accumulators screen.
To View System Accumulators:
1. At the Top Menu screen, press the Next Page button.
2. Press the System Acc button.
Figure 76
System Accumulators Screen
POWERED ON TIME
Powered On Time is the accumulated time, in hours, that the system has
been powered ON. Powered On Time accumulates regardless of the mode
of operation - whether it is in Setup or Operate mode. Powered On Time
cannot be reset.
SYSTEM ACTIVE TIME
System Active Time is the accumulated time, in hours, that the machine has
actively been controlling. System Active Time accumulates whenever seeds
are detected on at least one sensor. Planting time does not accumulate
during an ALL ROWS FAILED condition. System Active Time can be reset
by pressing the Reset Time button.
SYSTEM ACTIVE AREA
System Active Area is the accumulated area covered while the master/
control switch is on. System Active Area cannot be reset.