Selecting properties of the equation writer (eqw) – HP 49g+ User Manual
Page 54
Page 1-28
To illustrate these settings, either in algebraic or RPN mode, use the equation
writer to type the following definite integral:
‚O…Б0™„и™„¸\x™x`
In Algebraic mode, the following screen shows the result of these keystrokes
with neither _Small nor _Textbook are selected:
With the _Small option selected only, the display looks as shown below:
With the _Textbook option selected (default value), regardless of whether the
_Small option is selected or not, the display shows the following result:
Selecting properties of the equation writer (EQW)
First, press the
H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the
@@DISP@ soft menu key
(
D) to display the DISPLAY MODES input form. Press the down arrow key,
˜, three times, to get to the EQW (Equation Writer) line. This line shows
two properties that can be modified. When these properties are selected
(checked) the following effects are activated:
_Small
Changes font size to small while using the equation
editor
_Small Stack Disp
Shows small font in the stack for textbook style
display
Detailed instructions on the use of the equation editor (EQW) are presented
elsewhere in this manual.