Scheduling fax printing (memory lock), Fax-printing behavior – HP LASERJET 300 User Manual

Page 99

Scheduling fax printing (memory lock)

Use the fax printing feature to specify when faxes print. There are three fax printing modes that can be
selected. The selections are

Store all received faxes

Print all received faxes

, or

Use fax printing

schedule

Store all received faxes

is selected, then all incoming faxes will be stored in memory and not printed.

It is possible to access fax jobs stored in memory through the

MFP Retrieve Job

menu. Using this menu,

you can print or delete print jobs while they are stored in memory. For additional information about this
feature, see the Retrieve Job menu description in the MFP user guide.

NOTE:

The

MFP Retrieve Job

option is only available to the HP LaserJet 4345mfp and the HP Color

LaserJet 4730mfp, 9040/9050mfp, and 9500mfp. For the HP LaserJet M3035 MFP, M3027 MFP, M4345
MFP, M5025 MFP, M5035 MFP, M9040 MFP, M9050 MFP and HP Color LaserJet CM4730 MFP and
CM6040 MFP Series, retrieved stored faxes can be accessed by entering the

Fax Printing

menu and

changing the mode to

Print all received faxes

is selected, then all incoming faxes will be printed. Any faxes that are currently

stored in memory will also be printed.

Use fax printing schedule

is selected, then faxes will be only printed per the fax printing schedule. The

fax printing schedule can be set to lockout an entire day (24 hours) or lockout a time period during the
day. Only one lockout period can be set, but it can be applied to any number of days. The lockout period
is setup under the

Fax Printing

menu. For more information, see

Create a fax printing schedule

on page 93

NOTE:

When the lockout time ends, any faxes that were received and stored during the lockout period

are printed automatically.

Fax-printing behavior

To increase fax security, the behavior of the Fax Printing feature changed with the release of the HP
LaserJet M5035 MFP, M5025 MFP, M3035 MFP, M3027 MFP, M4345 MFP, M9040 MFP, M9050 MFP
and HP Color LaserJet CM4730 MFP and CM6040 MFP Series. The key differences are how call
reports, T.30 reports, report menus, and the control panel status line are handled or displayed. The
following table assumes that Fax Printing is enabled.

Menu setting for
call report and/or
T.30 Report

When fax is
received, how are
call report/T.30
report handled?

What happens
when a stored fax
is printed?

What happens to
menus for fax
reports & T.30
report?

Does the control
panel show
incoming
telephone
number?

Legacy MFP
Operation (9500,
9040/50, 4345,
4730)

Never

Not printed

Fax prints

Shown

Yes

Every fax

Not printed

Fax prints

Shown

Yes

M5035, M5025,
M3035, M3027,
M4345, M9040,
M9050, CM4730,
CM6040 MFPs

Never

Not printed

Fax prints

Hidden

Every fax

Not printed and
stored with fax

Fax prints, call
report(s) prints

Hidden

ENWW

Scheduling fax printing (memory lock)