HP LASERJET 300 User Manual

Page 80

●

Content Orientation (portrait or landscape)

●

Job Build combines multiple scans into a single job.

●

Image adjustment

●

Sharpness enhances text and graphic edges.

●

Darkness

●

Background removes a background that might be a result from copying color paper.

●

Notification changes how you are notified of the status of the fax transmission (that is, if the
fax was sent or if an error occurred and the fax was not sent).

NOTE:

Notification changes the notification setting for the current fax only.

When all settings are completed, touch

to return to the Settings menu.

On the Settings screen, touch the

Light

Dark

arrow to adjust the lightness/darkness of the fax

you are sending.

When all settings are completed on the Settings screen, touch

to return to the Fax screen.

Using the keyboard, enter a phone number. To enter additional numbers, touch

Next Number

and

continue entering numbers.

To remove a number from the list, use the arrow keys to highlight a number and then touch

Remove

NOTE:

If needed, enter a comma (,) to provide a two second pause after a prefix number (such

as a "9" or "0" ) to allow the internal phone system time to access an outside line before the
remainder of the number is dialed. To enter a comma, use the keypad on the control panel that
pops up when you touch the Recipient Number Entry Box

To enter a PIN as part of the recipient number, use the keypad on the control panel. Touch the

Recipient

field, and then touch the

button. This inserts a left bracket ([). Type the PIN, and

then touch the

button again to insert the right (]) bracket. The number within the brackets is

not displayed in the fax number that appears on fax reports.

Touch

Start

to send the fax. You can either touch the

Start

icon on the touch screen or press the

green

Start

button on the control panel.

If the fax recipient number matches one or more saved speed dials, the matched speed dials are
displayed and you are asked if you want to continue sending the fax to the indicated recipient(s).
Touch

Yes

to confirm the number and send the fax, or touch

to cancel the fax. Note that this

step is not required if the Fax Number Speed Dial Matching feature is disabled.

If the fax recipient number does not match any saved speed dials, a number confirmation screen
appears and you must re-type the fax number. After re-typing the number, touch

to send the

fax. Note that this step is not required if the Fax Number Confirmation feature is disabled.

NOTE:

If you have made any changes to the settings on the Settings screen (such as changing

notification or 1-sided to 2-sided), a Processing Job screen displays asking "Would you like to keep your
current settings?". If you press

Yes

, the MFP returns you to the Fax screen and the settings you made

are retained. This allows you to send another fax using the same settings. If you press

, the settings

are cleared (returned to their default values) and the MFP home screen displays.

Chapter 3 Use Fax

ENWW