HP LASERJET 300 User Manual
Page 41
6.
Remove the fax accessory from its antistatic pouch.
The fax accessory contains parts that are sensitive to electrostatic discharge (ESD). When
removing the fax accessory from its antistatic pouch and while installing it, use static protection,
such as a grounding wrist strap that is connected to the metal frame of the MFP, or touch the metal
frame of the MFP with your other hand.
7.
Align the fax accessory with the two guides. Make sure that the connector pins are aligned, and
then push the fax accessory into place. Make sure that the fax accessory is securely connected to
the formatter.
Figure 1-48
Inserting the fax accessory
8.
Slide the formatter board back into the MFP and tighten the two screws.
Figure 1-49
Inserting the formatter
ENWW
Installing the fax accessory
33