Emerson Liebert NX 10-30kVA - Manual (Page 33)

Maintenance Bypass Cabinet
25
4.0 M
AINTENANCE
B
YPASS
C
ABINET
The Maintenance Bypass Cabinet is designed to operate in UPS mode, bypass mode and maintenance
mode. The mode is selected using the Bypass Switch.
Figure 17 Single UPS with external Maintenance Bypass Cabinet—typical configuration
4.1 Bypass Switch
The Bypass Switch allows easy and rapid transfer of connected loads between the UPS and Bypass
source.
4.2 Normal (UPS) Mode
While the Maintenance Bypass Cabinet rotary switch is in the NORMAL position, the UPS is supply-
ing the connected load with continuous, high-quality AC power. In this mode of operation, the load is
protected by the UPS.