6 click the compression tab, Table 19 encryption parameters – Enterasys Networks Network Card User Manual
Page 238

226
RiverMaster Administrator’s Guide
Configuring Tunnel Protocols
Appendix B
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
6
Click the Compression tab.
The Compression properties screen appears as shown in Figure 126.
Table 19 Encryption Parameters
Tunnel
Protocol
Parameter
Explanation
IPSec
None
Disables encryption on the tunnel; because this results
in a less secure connection, this setting is not
recommended.
ARCFOUR 40 bit
Enables a 40-bit key public domain algorithm that is
designed to work with Rivest Cipher 4 (RC4), a
stream-based cipher method that supports both 40-bit
and 128-bit keys. Using RC4, data packets can be
encrypted as they are received instead of in blocks.
ARCFOUR 128 bit
Enables a 128-bit key version of ARCFOUR (described
above).
DES
Enables Data Encryption Standard (DES), a block
cipher method that uses 56-bit keys. Using DES, data is
encrypted in fixed-size blocks and packets are padded
to become a multiple of the block size.
Triple-DES
Enables a version of DES (described above) that
employs a DES encryption with one key, a decryption
with a second key, and then another encryption with a
third key. The result is equivalent to DES with a 112-bit
key.
PPTP
MPPE (40 bit)
Enables 40-bit key Microsoft Point-to-Point Encryption
(MPPE) which generates a key based on a hash of the
user’s password and invokes RC4 encryption.
MPPE (128 bit)
Enables 128-bit key MPPE on the tunnel. .