Enterasys Networks Network Card - Manual (Page 108)

96
RiverMaster Administrator’s Guide
Using the Notification Service to Send E-Mail Chapter 4
Setting Up Aurorean Services
Figure 52 Add a Notification E-Mail Address Window
5 In the E-Mail Address field, type the E-mail address of the person you
want to receive notification messages.
6 Use the check boxes to select the events which will generate E-mail
and click OK.
You can select from the following events:
– Alarms notify you when a significant error occurs with a service
running on a Aurorean Virtual Network system or a general
system problem that is preventing the system from operating
normally.
– Alerts occur when an error count threshold has been crossed and
an alarm condition is imminent.
– A Problem Notification typically indicates a remote client
connection problem which Aurorean Client’s Prescriber feature
diagnosed.
7 Do one of the following:
– Click Update to save the new address to the mailing list.
– Click Cancel to clear the mailing list information without saving
your changes.