Table 11 message types – Enterasys Networks Network Card User Manual
Page 178

166
RiverMaster Administrator’s Guide
Monitoring System Activity
Chapter 7
Viewing Server Activity & Statistics
4
Using the Message Type check boxes, specify the types of messages
you want to view.
Table 11 describes the six types of messages available. To view
Aurorean Virtual Network server activity, select Problem
Notification, Alarm, and/or Alert messages. To view activity for an
individual Aurorean user, select Activity Trace, Authentication,
and/or Accounting messages.
Table 11 Message Types
Message Type
Explanation
Problem Notification
Typically these messages indicate a remote client connection
problem which Aurorean Client’s Prescriber feature
diagnosed and reported. These messages are generated by
the APS or ANG, not Aurorean users.
Alarm
These messages are generated when an error count
threshold has been crossed and an alarm condition is
imminent. These messages are generated by the APS or
ANG, not Aurorean users.
Alert
These messages notify you when a significant error occurs
with a service running on a Aurorean Virtual Network system
or a general problem that is preventing the server from
operating normally. These messages are generated by the
APS or ANG, not Aurorean users.
Activity Trace
These messages cover a wide range of Aurorean user
activity, including successful authentications, VPN user name
changes, and Prescriber session reports. If you select this
type, you must enter a Aurorean user’s name in the
Username field.
Authentication
These messages provide a detailed trace of challenge and
response activity during the authentication process. If you
select this type, you must enter a Aurorean user’s name in
the Username field.
Accounting
These messages track the login and logout activity of
individual Aurorean users, including statistical data reported
by the Aurorean application, and other connection statistics
such as the ISP name, POP phone number, and connection
speed. If you select this type, you must enter a Aurorean
user’s name in the Username field.