Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 290)

Updating URSA Mini SSD Recorder’s internal software
Update your URSA Mini SSD Recorder using the Blackmagic Camera Setup Utility software.
The SSD Recorder will need to be powered when updating, so we recommend keeping the
SSD Recorder connected to URSA Mini during the update process. This also means your
camera will need to supply consistent power, so be sure to plug into external power.
URSA Mini SSD Recorder has a USB-C connector on the underside of the module for updating
its internal software. Connect your computer to this USB connector and launch Blackmagic
Camera Setup Utility. You will be prompted to update if your computer detects that your
URSA Mini SSD Recorder is using outdated version. Follow the on screen prompts to update
your URSA Mini SSD Recorder’s internal software.
Use the USB-C connector on the underside of URSA Mini SSD Recorder to update the internal software
NOTE Refer to the ‘Blackmagic Camera Setup Utility’ section in this manual
for more information.
TIP We recommend updating all your Blackmagic URSA equipment at the same time
for optimized performance.
290 URSA Mini SSD Recorder