Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 156)

3 Scroll to ‘exit’ and press the ‘menu’ button to close the menu display view.
The ‘shortcuts’ settings in URSA Viewfinder
Setup
The ‘setup’ menu provides the following features:
Brightness
Allows adjustments for the brightness of the display with range -10 to +10.
Tally Brightness
Allows adjustments of tally LED brightness.
Focus Chart
Your Blackmagic URSA Viewfinder has a built in focus chart so you can focus the eye
piece to suit your eyes. Simply turn the focus diopter on the eyepiece until the chart is
in perfect focus. Pressing any button on your viewfinder will close the focus
chart display.
Frame Guide
Toggles the appearance of frame guides when set as an overlay. When ‘frame guides’
are turned ‘on’, your viewfinder will display the same frame guides set for ‘all’ outputs in
your camera’s ‘monitor settings’. You can toggle the frame guide view on your
viewfinder by selecting on or off.
For more information, see the ‘Monitor Settings’ section in this manual.
Safe Area Guide
Toggles the appearance of a safe area guide when the ‘overlay’ is set to ‘on’.
When ‘safe area guide’ is turned ‘on’ in your URSA Mini’s ‘all’ monitor settings, you can
use this setting to toggle the safe area guide on or off.
For more information, see the ‘Monitor Settings’ section in this manual.
Grid
Toggles the appearance of a rule of thirds grid, crosshair or center dot. When ‘grids’
are turned ‘on’ in your URSA Mini’s ‘all’ monitor settings, you can use this setting toggle
their appearance in your Blackmagic URSA Viewfinder when overlays are on.
For more information, see the ‘Monitor Settings’ section in this manual.
156 Blackmagic URSA Viewfinder