Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 203)

Tracker Interface
The 10 pin ‘tracker’ connector provides a multiplexed output for talkback and tally signals, plus
data such as teleprompter information. This output is commonly used by support crew
operating production equipment such as a camera crane.
A pinout diagram is provided in this section if you want to build your own cable.
Tracker Output Pinout Diagram
External view Pins Signal I/O Specifications
1 Tracker left Out
Tracker output,
-20 dBu unbalanced
2 GND (Talk) – GND for tracker talk
1
8 9
2 3
7 6
10
4
5
3 GND (Receive/PGM/tally) – GND for receive/PGM/tally
4 Tracker right Out
Tracker output,
-20 dBu unbalanced
5 Unregulated Out 12V DC (nom), 500mA (max)
6 GND (Unregulated) – GND for unregulated
7 Tracker talk (X) In
Tracker talk 0 dBu /-20 dBu,
high impedance balanced
10 pin ‘tracker’
connector
8 Tracker talk (Y) In
9 G Tally Out
On: 12V
Off: high impedance (open)
10 R Tally Out
On: 12V
Off: high impedance (open)
DC Connection
You can power additional accessories, for example an external monitor, via the DC out connector.
The DC out connector lets you power D-Tap Output
additional accessories, such as a monitor
or external recording equipment
203 Camera Unit Connections