Blackmagic Design URSA Mini Pro 12K (PL) User Manual
Page 105
Display 3D LUT
Your URSA Mini can apply 3D LUTs to any output to approximate the look of color graded
footage. This is especially useful when shooting with ‘film’ dynamic range, as it can produce an
intentionally ‘flat’ low contrast image.
If your URSA Mini has a 3D LUT active, use this setting to independently apply that LUT to your
LCD touchscreen, front or main SDI output.
NOTE
For more information on loading and using 3D LUTs, see the ‘LUTS’ section of
this manual.
Zebra
Tap the ‘zebra’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable zebra guides for
those outputs. For more information on zebra guides and setting zebra levels, see the
‘touchscreen features’ section in this manual.
Focus Assist
Tap the ‘focus assist’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable focus assist
for those outputs. For more information on focus assist and setting focus assist levels, see the
‘touchscreen features’ section in this manual.
Frame Guide
Tap the ‘frame guide’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable frame
guides for those outputs. For more information on frame guides and choosing different guides,
see the ‘touchscreen features’ section in this manual.
Grid
Tap the ‘grid’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable a rule of thirds grid
for those outputs. For more information on the rule of thirds grid, see the ‘touchscreen features’
section in this manual.
Safe Area Guide
Tap the ‘safe area’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable safe area
overlay for those outputs.
For more information on safe area guides, and setting the level of safe area guides, see the
‘touchscreen features’ section in this manual.
NOTE
Use the ‘safe area guide %’ setting in your URSA Mini’s ‘all’ monitoring settings
to set the size of the safe area guide.
False Color
Tap the ‘false color’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to enable false color
exposure assistance for those outputs.
For more information on false color, see the ‘touchscreen features’ section in this manual.
LCD Monitor Settings 2
The second page of your URSA Mini’s ‘LCD’ monitor tab contains settings unique to your
LCD touchscreen.
105
Settings