Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 111)

Adjusting your URSA Mini Pro’s ND filter setting will reveal the ND filter indicator
NOTE You can adjust the terminology used by the ND filter indicator to reflect the
conventions you’re used to. The options are ND number, stops and fractions. You can
set your preferred format in your URSA Mini Pro’s ‘setup’ menu.
LUT indicator
The LUT icon will be visible on the LCD, front SDI or main SDI when ‘status text’ is switched
on and you have a LUT applied to that output.
The LUT icon lets you know that you have a LUT applied to the image
All Monitor Settings 2
The second page of your Ursa Mini’s ‘all’ monitor tab contains the following options:
Grids
To set which combination of grids and crosshairs you want to display on your URSA Mini’s LCD
touchscreen, front and main SDI outputs, tap the ‘thirds,’ ‘crosshairs,’ or ‘center dot’ options in
this setting.
For more information, see the ‘grids’ guide in the ‘touchscreen features’ section earlier in
this manual.
Safe Area Guide %
To adjust the size of the safe area overlay on your URSA Mini’s LCD touchscreen, front SDI and
main SDI outputs, tap the arrows to the left and right of the percentage displayed in this setting.
This percentage indicates the size of the safe area in relation to the image frame.
Most broadcasters require a 90% safe area.
111 Settings