Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 192)

DC out connector Pinout Diagram
External view Pins Signal I/O Specifications
1 Unregulated GND – GND for Unregulated Out
2 NC – No connection
3 NC – No connection
‘DC out’ connector
4 Unregulated Out Out 12V DC nominal at up to 500 mA.
Additional Camera Controls
When URSA Mini or URSA Broadcast is being used as a studio camera, we have added camera
controls on the fiber converter including iris and focus control, so you can control compatible
lenses from behind the camera. This is helpful if you don’t have a camera control operator
controlling the lens remotely.
As a studio camera, URSA Mini and URSA Broadcast still have the ability to record internally,
so the record button lets you trigger internal recording on the camera.
Light
Turns on the backlight to illuminate the operation panel, so that all your controls can be
seen easily when operating in a dark environment.
Focus
Pressing the button marked ‘focus’ will trigger the autofocus if you are using a lens that
supports autofocus.
Record
Pressing the button marked ‘rec’ will trigger the recording when pressed, and will stop
recording when pressed again.
Iris
If you are using a compatible active lens that allows control from the camera, you can
open or close the iris using the ‘iris’ wheel. Rotate the wheel up or down to open or
close the lens aperture.
1 4
2 3
192 Operating the Camera Fiber Converter