Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 286)

Mounting and connecting URSA Mini SSD Recorder
URSA Mini SSD Recorder mounts to the back of URSA Mini directly behind the camera body,
using your camera’s rear SDI in and SDI out BNCs to pass data to and from URSA Mini SSD
recorder. It’s worth noting that because the recorder uses these SDI inputs and outputs, you
can’t simultaneously connect your camera to an ATEM switcher.
TIP URSA Mini SSD Recorder featuresa passthrough cable for your camera’s battery
power supply, so you can attach V-mount or gold mount batteries to the rear of the
camera behind the recorder.
NOTE Before installing URSA Mini SSD Recorder, you’ll need to update your camera’s
internal software to version 4.8 or higher using Blackmagic Camera Setup Utility.
For more information on updating your camera firmware see the section ‘Blackmagic
Camera Setup Utility’ in this manual.
286 URSA Mini SSD Recorder