Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 14)

To turn on URSA Mini Pro:
1 On Blackmagic URSA Mini Pro, a power switch is also located above the fold out LCD.
Move the switch to the ‘on’ position to power your camera.
2 To turn the camera off, move the switch to the ‘off’ position.
Move the power switch to ‘on’ to power your camera
URSA Mini Pro also features a redundant power switch, which allows the camera to be
turned on and off by briefly holding down the ‘rec’ and ‘forward skip’ buttons on the
inside control panel. While you wouldn’t normally power your camera using this
method, it is provided as a helpful alternative if the power switch along the top edge is
obscured, for example when mounted on a custom rig.
If you need to, you can also briefly hold down the record and forward skip buttons
on the control panel behind the LCD to power your camera on or off
TIP If your URSA Mini Pro is turned off when the power switch is set to ‘on’, your
camera may have been powered down via Bluetooth ® control or by holding down the
record and forward skip control panel buttons. Simply toggle the power switch ‘off’ and
‘on,’ or hold down the relevant control panel buttons to power the camera on.
14 Getting Started