Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 202)

Talkback Connection
The two female 5 pin XLR connectors let you plug in two headsets, which allows two people to
communicate via talkback simultaneously. For example, the camera operator’s headset can be
plugged into the first XLR connector, and a crane operator or fellow crew member, such as a
sound operator, could plug into the second XLR headset connector. A pinout diagram for the
headset XLR connector is included below.
Headset XLR Pinout Diagram
External view Pins Signal I/O Specifications
1
2
3
5
4
5-pin XLR
‘headset’ connector
1 Intercom MIC (Y) GND
The intercom mic input supports
electret condenser mics and
dynamic mics, which can be
balanced or unbalanced. Pin 1 is
the mic signal common, and pin
2 is the mic signal input for both
types. With electret mics, a DC
bias supply is also output via the
same mic signal input pin.
2 Intercom MIC (X) In
3 GND GND GND
4 Intercom left Out
5 Intercom right Out
The corresponding intercom controls are located above each headset connection.
For more information on how to use the intercom controls, refer to the ‘Operating the Camera
Fiber Converter’ section.
The intercom controls are used to mix Tracker Interface connector
talkback audio levels
202 Camera Unit Connections