Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 288)

7 8
Connect the SSD Recorder’s SDI In and SDI out
cables to the SDI inputs and outputs on the back
of your camera. The SSD Recorder’s cables are
marked ‘in’ and ‘out’ to help match them to the
appropriate connector on your camera. If you want to use a battery plate with URSA Mini
SSD Recorder, use a 2mm hex key driver to
remove the four M3 screws holding the molex
socket cover panel in place. Once the molex
socket is uncovered, attach a battery plate using
the steps outlined in the section ‘mounting
batteries’ in this manual.
Using URSA Mini SSD Recorder
When URSA Mini SSD Recorder is connected and an SSD is loaded, the recorder takes over
from URSA Mini’s number ‘2’ storage slot. You’ll see an ‘SSD’ indicator over slot 2 on your
camera’s storage manager when URSA Mini SSD recorder is in use.
When an SSD is inserted into URSA Mini SSD Recorder, your camera’s
storage manager will display ‘SSD Recorder’ over storage slot 2.
This means that recording, playback and storage management is exactly the same for SSDs as
it is for CFast or SD cards. For general information on storage management, as well as specific
instructions for choosing SSDs, see the ‘storage media’ section of this manual.
288 URSA Mini SSD Recorder