Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 133)

NOTE If your URSA Mini’s preset slots are full, the import menu will not be available.
You will need to delete an existing preset to make room.
Exporting presets
To export a preset to a CFast or SD card, select the preset you want to export by tapping it,
and tap the ‘manage’ icon. You will be prompted with two options, ‘import preset’ or ‘export
selected preset.’
Use the storage media selection switch on URSA Mini Pro to select either SD or CFast,
depending on the location you would like to export the preset to. If you are using URSA Mini
SSD Recorder, you can also export presets to an SSD. Tapping ‘export selected preset’ will
prompt you to choose which card you would like to export to. Choosing a card will export the
selected preset to a ‘presets’ folder on that card.
If the CFast or SD card you’ve chosen already has a preset saved to it with the same name as
the one you’re exporting, you will be prompted to overwrite the preset on the card, or keep
both presets.
Deleting presets
Your URSA Mini has space for twelve presets. To delete a preset, select it and tap the ‘delete’
icon. You will be prompted to confirm your choice. Tap ‘delete’ to confirm.
LUTS
The ‘LUTS’ menu lets you import, export and apply 3D LUTs to your camera’s outputs.
Your URSA Mini’s ‘LUTs’ tab
Introducing 3D LUTs
Your URSA Mini can apply 3D LUTs to images on its LCD touchscreen, front SDI and main SDI.
LUTS work by telling your URSA Mini what color and luminance output to show for a particular
color and luminance input. For example, a LUT may tell your URSA Mini to display a vibrant,
saturated blue when it receives a relatively dull blue input. This can be useful when shooting
Blackmagic RAW footage, or using ‘film’ dynamic range, both of which have an intentionally
undersaturated, ‘flat’ appearance. By applying a LUT, you can get an idea of what your footage
will look like after it has been graded.
133 Settings