Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 169)

Once you have set up your shortcuts as required you can either scroll to ‘exit’ and press the
‘menu’ dial to close the menu display view, or hit the back button to exit out of the menu.
The ‘shortcuts’ submenu
Setup
The ‘setup’ menu is where you choose your preferences for how the viewfinder is setup.
Front Tally Brightness
Allows adjustments of tally LED brightness between ‘off’, ’low’, ‘medium’ and ‘high’. The tally
light will illuminate whilst adjustments are being made so you can see what each brightness
level represents.
The ‘setup’ submenu
Rear Tally Brightness
Allows adjustments of tally LED brightness between ‘low’, ‘medium’ and ‘high’. The tally light
will illuminate whilst adjustments are being made so you can see what each brightness
level represents.
TIP A high LED brightness setting is recommended for bright conditions, as it will
provide greater visibility for talent and operators in the conditions. A low LED
brightness is recommended when filming in darker environments where it is easier to
see when the light is on.
169 Blackmagic URSA Studio Viewfinder