Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 121)

Reference Timing
These settings allow you to manually adjust the reference timing on a line or pixel basis.
Simply tap the arrow icons on either side of the ‘lines’ and ‘pixels’ settings to make adjustments.
Program Audio Source
This setting is only available for URSA Mini Pro. When connected to a switcher, setting ‘program
audio’ to ‘on’ prioritizes the program return audio as your input source to be mixed with talkback
when monitoring using headphones or a headset. This is useful when you are not feeding the
switcher audio from your camera but you still want to listen to the program feed from the
switcher via the ‘SDI in’ port. Setting ‘program audio’ to ‘off’ prioritizes audio from your camera’s
internal mics or ‘audio in’ XLR ports, and is the default setting.
Program Mix
This setting changes the balance of camera sound to talkback sound. The headphones will
output audio following what is displayed on the LCD. For instance, if you are in camera view,
camera audio is heard. If you are in program view, program audio is heard. The default
setting is 100%.
Headset Mic
Move this volume slider left or right to increase or decrease audio microphone input levels.
The default setting is 50%.
Sidetone Level
Adjust this slider to set the volume of your own voice mic in your headset.
Set Function Button
On the outside of your URSA Mini’s LCD touchscreen, you’ll notice two function buttons,
‘F1’ and ‘F2.’ These are mappable to frequently used features and are quickly accessible when
using your camera with the LCD touchscreen closed, such as when you are using
URSA Viewfinder.
On URSA Mini Pro 12K, URSA Mini Pro 4.6K G2, URSA Mini Pro 4.6K and URSA Mini 4.6K
models, you can also map the HFR button to another function or disable it. The default setting
for the ‘HFR’ button is ‘off speed rec’.
121 Settings