ProSoft Technology ILX34-AENWG - Manual (Page 91)

ILX34-AENWG ♦ Point I/O Platform Diagnostics and Troubleshooting
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 91 of 177
August 16, 2013
Field Description
WEP Key Index If using WEP128 encryption, select the Key Index that matches the Key Index
used in the Access Point.
WEP Keys (1-4) If using WEP128 encryption, enter the WEP Keys that match the Keys in the
Access Point.
Transmit Data
Rate The recommended The ILX34-AENWG supports the following transmit data
rates. The default value is Auto: Max 54 Mbps, and this is the recommended
value for most applications.
1 Mbps Auto: Max. 1 Mbps
2 Mbps Auto: Max. 2 Mbps
5.5 Mbps Auto: Max. 5.5 Mbps
11 Mbps Auto: Max. 11 Mbps
18 Mbps Auto: Max. 18 Mbps
24 Mbps Auto: Max. 24 Mbps
36 Mbps Auto: Max. 36 Mbps
54 Mbps Auto: Max. 54 Mbps
4.1.3 Browse Chassis Page
The B ROWSE C HASSIS page opens when you click the B ROWSE C HASSIS link on
the left side of the page. Use this page to retrieve a list of modules
communicating with the ILX34-AENWG adapter.
Click the S TART button to begin browsing. The ILX34-AENWG will query slots 1
through 63. Click C ANCEL to stop browsing when the list is populated with the
total number of modules installed in the system.
Tip: Select (check) the I NCREASE T IMEOUT check box to give modules more time to respond to the
query. This selection is useful when browsing a busy system.
Tip: Select (check) the D ISPLAY C OMPACT check box to reduce the font size and limit scrolling for
systems with a large number of modules.