ProSoft Technology ILX34-AENWG - Manual (Page 15)

ILX34-AENWG ♦ Point I/O Platform Start Here
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 15 of 177
August 16, 2013
o Microsoft Windows Vista
o Microsoft Windows XP Professional with Service Pack 1 or 2
o Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
o Microsoft Windows Server 2003
 128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
 Microsoft Windows Explorer version 7
 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024

768 recommended)
 DVD drive
Note: The Hardware and Operating System requirements in this list are the minimum
recommended to install and run software provided by ProSoft Technology. Other third party
applications may have different minimum requirements. Refer to the documentation for any third
party applications for system requirements.
1.4 Install the Configuration Tools
1.4.1 Install the ILX34-AENWG Add-On Profile
1 Verify that your computer meets the hardware and operating system System
Requirements (page 14)
Important: You must have "Administrator" rights on your computer to install this application.
2 Insert the ProSoft Solutions DVD into your computer.
3 On most computers, the installation program will start automatically within a
few seconds. If the installation does not start automatically on your computer,
click the S
TART button, choose R UN , and then type explorer . Click OK to start
Windows Explorer. In Windows Explorer, open the M Y C OMPUTER icon and
navigate to the DVD drive.
4 Navigate to the folder containing the ILX34-AENWG Add-On Profile, and then
double-click the file S ETUP . EXE . This action starts the installation wizard.
5 Follow the instructions on the installation wizard to install the program.
6 Click F
INISH to complete the installation. If you are prompted to restart your
computer, save your work in any applications that are running, close the
applications, and allow the computer to restart.
1.4.2 Install ProSoft Wireless Designer
1 On the DVD, navigate to the folder containing ProSoft Wireless Designer, and
then double-click the file S ETUP . EXE . This action starts the installation wizard.
2 Follow the instructions on the installation wizard to install the program.
3 Click F
INISH to complete the installation. If you are prompted to restart your
computer, save your work in any applications that are running, close the
applications, and allow the computer to restart.