ProSoft Technology ILX34-AENWG - Manual (Page 142)

Ladder Logic ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 142 of 177 ProSoft Technology, Inc.
August 16, 2013
Configuration Data Data Type Default Value Valid Data Values
FilterA
FilterB
FilterZ
BIT 4
BIT 5
BIT 6 0=Input A/B/Z Not Filtered
1=Input A/B/Z Is Filtered
Decimal Position SINT 0 Counter Config 0, 1, 2, 4:
-128…+127 (0…255)
Counter Config 5 & 7:
-4…+2
Time Base
(in 10 ms intervals) INT 0 Counter Config 7 only:
0…3000 ms (10 ms…3 s)
Gate Interval
(Product of Time Base x Gate Interval
must be
 3000 ms)
SINT 0 Counter Config 7 only:
-128…+127 (0…200)
Scalar SINT 0 Counter Config 5 only:
-128…+127 (0…255)
0, 1, 2, 4, 8, 16, 32, 64, -128
Rollover DINT 16,777,215 1…16,777,216
Preset (< Rollover) DINT 0 0…16,777,215
1734-IJ, 1734-IK
1734 POINT I/O Catalog Number RSLogix5000 Module Description
1734-IJ 1 Channel 5V dc Encoder / Counter
1734-IK 1 Channel 15…24V dc Encoder / Counter
Configuration Data Data Type Default Value Valid Data Values
SS Counter Control SINT 0
SS Counter Reset BIT 0 0=Count Unchanged
1=Count Cleared
SS Counter Preset BIT 1 0=Count Unchanged
1=Count Set to Preset
SS Value Reset BIT 2 0=Count Unchanged
1=Count Cleared
To enter values from +128 to +255, use these conversion formulas:
 Decimal Position
Desired Decimal Position Value - 256 = Entered Decimal Position Value.
Example: for a divisor of 200, 200 - 256 = -56
 Gate Interval
Desired Gate Interval Value - 256 = Entered Gate Interval Value.
Example: for a Gate Interval of 200, 200 - 256 = -56
 Scalar
Desired Scalar Value - 256 = Entered Scalar Value.
Example: for a Scalar of 128, 128 - 256 = -128