ProSoft Technology ILX34-AENWG - Manual (Page 44)

Configure the ILX34-AENWG ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 44 of 177 ProSoft Technology, Inc.
August 16, 2013
9 Click the S ET C HASSIS S IZE IN M ODULE button.
Remember to inhibit and uninhibit the module for this to take effect.
Now you can put your controller in Run mode, and the connection should be
successful.
Important: The information found in Controller Tag 1734 POINT I/O Module/RSLogix 5000
Controller Tag Reference (page 118) is also available in the RSLogix 5000 online help file. Use the
Help file search function under the 1734 catalog number that you are configuring and select the
Module Defined Data Types option. You see all of the configurable parameters and associated
values.
2.6 Configuring Wireless Settings in RSLogix 5000
Important: RSLogix 5000 does not save the Wireless Settings inside the project file. The Wireless
Settings and Wireless Statistics tabs are populated only when the processor is online to the ILX34-
AENWG.
Note: Allow sufficient time (30 to 60 seconds) for RSLogix 5000 to send and receive wireless
settings from the ILX34-AENWG.