ProSoft Technology ILX34-AENWG - Manual (Page 50)

About the Example Applications ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 50 of 177 ProSoft Technology, Inc.
August 16, 2013
 I/O modules set up to use rack optimization communicate at the rate of the
RPI configured for the ILX34-AENWG adapter.
 I/O modules configured for direct communication communicate at their own
set RPI and ignore the ILX34-AENWG adapter RPI.
Attention: You must use series C POINT I/O modules with the ILX34-AENWG adapter. Series A
or B POINT I/O modules will not work with this adapter.
3.4.1 Add the Relay Output Module and Configure for Direct
Connection
1 Right-click the ILX34-AENWG adapter under the I/O Configuration folder and
select N EW M ODULE .
2 In the S ELECT M ODULE dialog box, choose the 1734-OW2 relay output
module from the list, and click OK.
3 In the M ODULE P ROPERTIES dialog, enter the following information:
a) Name