ProSoft Technology ILX34-AENWG - Manual (Page 85)

ILX34-AENWG ♦ Point I/O Platform Diagnostics and Troubleshooting
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 85 of 177
August 16, 2013
Statistics
Field Description
Packets Received Successfully Messages received with success. The average value gives a
good indication of RF bandwidth consumption. The average
should not exceed 1000 packets per second. If it does exceed
this, the RPI should be decreased on the connections.
Packets Transmitted
Successfully Messages sent with success. The average value gives a good
indication of RF bandwidth consumption. The average should
not exceed 500 packets per second. f it does exceed this, the
RPI should be decreased on the connections.
Packet Transmit Failures Messages that have been retried 8 times and still were not
transferred successfully. This number should not exceed 1% of
the Packets Transmitted successfully.
Packet Transmit Retries Messages sent requiring a retry. Retries of 20 to 50 per second
are not uncommon. Retries of several hundred per second
indicate the RF network is too busy or the RF link is poor.
Version
Field Description
Kernel Revision The internal software revision for the POINT I/O adapter
WIFI Module Firmware The internal software revision for the wireless component of the
POINT I/O adapter
Signal Strength Graph
Image Signal Strength Signal to Noise
-90 dBm 0 dB
-88 dBm 2 dB
-86 dBm 4 dB
-84 dBm 6 dB
-82 dBm 8 dB
-80 dBm 10 dB
-78 dBm 12 dB
-76 dBm 14 dB
-74 dBm 16 dB
-72 dBm 18 dB
-70 dBm 20 dB
-68 dBm 22 dB
-66 dBm 24 dB
-64 dBm 26 dB
-62 dBm 28 dB