ProSoft Technology ILX34-AENWG - Manual (Page 35)

ILX34-AENWG ♦ Point I/O Platform Configure the ILX34-AENWG
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 35 of 177
August 16, 2013
2 Configure the ILX34-AENWG
In This Chapter
 Create a New RSLogix 5000 Project ..................................................... 35
 Create the Network ............................................................................... 36
 Create the Adapter ................................................................................ 38
 Add POINT Modules Under the Adapter ............................................... 40
 Configure 1734 POINT I/O Modules ...................................................... 40
 Configuring Wireless Settings in RSLogix 5000 .................................... 44
 Install the Antenna ................................................................................. 45
 Test the Network Installation Plan ......................................................... 46
2.1 Create a New RSLogix 5000 Project
Note: The following steps require RSLogix 5000 version 17 or newer, and a processor with
firmware compatible with this version of RSLogix 5000. To use the ILX34-AENWG adapter with an
earlier version of RSLogix 5000 or the processor firmware, please refer to Using the ILX34-
AENWG with Earlier Versions of RSLogix 5000 (page 170).
1 Open the F ILE menu, and then choose N EW
…