Page – RISCO Group Gardtec 490X User Manual

Page 62

Text mode
Original mode

Page

GT490X Engineer’s Reference Guide

Press No until the required setting is displayed
then press Yes. The display will show:-

Please note that Confirmed PA can only be produced by activating two zones
programmed as panic or a keypad panic and a Panic zone.

If Mod + FF tis used the Alarm B channel will be transmitted for PA/Intruder
confirmation.
If Mod + PID is used the confirmed PA will transmit E129.
If Mod + SIA is used the confirmed PA will transmit HV.

Press Yes. The display will show:-

Note: Duress is defaulted to Off and cannot be changed.

This concludes the programming for
Panic. Press 0 (zero) to return to:-

Press 0 (zero) until the display shows:-

PA = Bells Only

> Non-Testable

Duress :Off

Program . . . . _ _ _
Panic / Duress

01 Jan 00: 00: 01

PA Confirm
=Off

PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 61