Page – RISCO Group Gardtec 490X User Manual

Page 48

Page

GT490X Engineer’s Reference Guide

Then:-

22)

Repeat from Step 19 until all the RKPs have
ben installed onto the system.

23)

Press 0 (zero). The display will show:-

24)

Press No. The display will show:-

25)

Press Yes. The display will show:-

26)

Press No until the setting you require is displayed
then press Yes. The display will show:-

27)

Press No. The display will show:-

28)

Press Yes. The display will show:-

Note: Use of this option will require a compatible G-Tag RKP.
Default is Off, but maybe changed to On. It is intended for use with the external prox reader
(E-Reader) and monitors the antenna of the reader for being disconnected.

29)

Press No until the setting you require is displayed
then press Yes. The display will show:-

30)

This concludes the programming for
Keypad. Press 0 (zero) to return to:-

Press 0 (zero) until the display shows:-

Program Keypad
Number ?

Program Keypad
Backlight Mode ?

Backlight . . .
= On if EE/Key

Enter Keypad # _
then =YES or -NO

Program . . . . _ _ _
Keypad ?

01 Jan 00: 00: 01

Program Keypad
ACE/Prox ?

Prox Tamp. Detect
=Off

Program Keypad
ACE/Prox ?

PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 47