RISCO Group Gardtec 490X User Manual

Page 60

Page

GT490X Engineer’s Reference Guide

Press No. The display will show:-

10)

Press Yes. The display will show:-

Note: Line Fault is defaulted to Limited and may not be changed.
This limit is set to 3 events.

11)

Press Yes. The display will show:-

12)

Press No. The display will show:-

13)

Press Yes. The display will show:-

With Detect programmed as 00 Linefault detection is instant or it may be delayed
if required.

14)

Press No twice. The display will show:-

15)

Enter the time you require (in seconds) followed
by Yes. The display will show:-

16)

This concludes the programming for
Linefault Sounders. Press 0 (zero) to return to:-

Press 0 (zero) until the display shows:-

For information on Linefault Sounders refer to page 93

Program Lineflt
Log Mode ?

Program Lineflt
Detect Time ?

Detect
= 30 Secs

Detect
> _ _ Secs

Lineflt Log
: Limited

Program . . . . _ _ _
Linefault Modes ?

01 Jan 00: 00: 01

PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 59