RISCO Group Gardtec 490X - Manual (Page 40)

Page 39
GT490X Engineer’s Reference Guide
7) Press No. The display will show:-
8) Press Yes. The display will show:-
Note: Entry Time 2 is defaulted to 30 seconds and may not
be changed.
Warning Bell. Default is set to On but may be changed to Off. If Warning Bell is On, then Bells will
operate during Entry Time 2, after the theoretical expiry of Entry Time 1 has been reached. If set to
Off, the bells will activate only when both Entry Time 1 and 2 have expired.
9) Press No to change the setting followed by Yes
The display will show:-
10) This concludes the programming for
Entry Times. Press 0 (zero) to return to:-
Or
Press 0 (zero) until the display shows:-
Program Entry
Time 2 ?
Entry Time 2 : 30s
Warning Bell = On
Program . . . . _ _ _
Entry Times ?
01 Jan 00: 00: 01
Program Entry
Time 2 ?
PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 39