Page – RISCO Group Gardtec 490X User Manual

Page 50

Page

GT490X Engineer’s Reference Guide

Press No until the required setting is displayed,
then press Yes. The display will show:-

Note:

If On is selected, the Vo-Comm menu will now appear in the USER
mode. Please refer to GT490X User Guide for further programming
information.

Press No until the setting you require is displayed,
then press Yes. The display will show:-

Press No. The display will show:-

Press Yes. The display will show:-

10)

Press No twice. The display will show:-

11)

Enter the number of seconds you require for
the Fire Zone Delay, followed by Yes.
The display will show:-

With Digi Delay programmed, the alarm transmission to Central Station will be
delayed for the number of seconds programmed.
With Part Alarm programmed to Off there will be no transmission of Alarm,
Alarm B or Alarm Abort if the system is Part Set.

12)

Press No twice. The display will show:-

13)

Enter the number of seconds you require for
the Digi Delay in Part Set followed by Yes.
The display will show, for example:-

14)

Press No until the required setting is displayed,
then press Yes. The display will show:-

15)

Press No. The display will show:-

Test Digicom
Channels ?

Program Digicom
Type or Test ?

Program Digicom
Delay / Part

Program Digicom
Channels

Digi Delay = 00s
Part - Alarm = On

Digi Delay = _ _s
Part - Alarm = On

Digi Delay = 99s
Part - Alarm > On

VoComm
=Off

Fire Zone Delay
=90 Secs

Fire Zone Delay
>-- Secs

PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 49