RISCO Group Gardtec 490X - Manual (Page 37)

Page 36
GT490X Engineer’s Reference Guide
35) Press No. The display will show:-
Setting Confirmation uses the Strobe Light to confirm that the system has finally
set.
36) Press Yes. The display will show:-
37) Press the No key to scroll through the options
Available options for Strobe Confirm are.
Off Strobe Confirm is turned Off
Full-Set The Strobe will Confirm only on Full Set
Any-Set The Strobe will Confirm on Any Set (Full or Part)
38) When the required setting is displayed press Yes.
The display will show:-
Press No to select On/Off.
If programmed to On, when the radio fob is
pressed to arm the system the keypad will
display:-
If Yes is pressed the system will start to set.
Note: If the No key is pressed or you take longer than 20 seconds the display
will return to the time and date.
39) When the required setting is displayed press Yes.
The display will show:-
40) Press No. The display will show:-
Program Setting
Confirmation ?
Program Setting
Confirmation ?
Program Setting
for Auto-Part ?
Strobe Confirm
= Off
Fob - Arm Keypad
Confirm = Off
Press YES to Set
PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:32 Page 36