Xerox WorkCentre 7835ii - Manual (Page 79)

Security
Xerox ® WorkCentre ® 7800/7800i Series Color Multifunction Printer 79
System Administrator Guide
Configuring Authentication Server Settings for NDS
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select NDS (Novell).
Note: If you do not see this authentication type, ensure that the NetWare protocol has been
enabled under Connectivity > Setup > NetWare > Edit.
3. Click Add New.
4. Under Default Tree/Context, in the Tree and Context fields, type the details.
5. Click Save Server.
6. To specify server settings for an alternate authentication server, click Add New.
7. To copy the settings from another server, select a server from the list and click Copy From.
8. Click Edit to update the settings.
Configuring Authentication Server Settings for SMB
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
3. Click Add New.
4. Under Domain, type the domain name of your authentication server.
5. Select the address type.
6. Type the appropriately formatted address and port number.
7. Click Save.
8. To specify server settings for an alternate authentication server, click Add New.
9. To copy the settings from another server, select a server from the list and click Copy From.
10. Click Edit to update the settings.
Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server
page in Xerox ® CentreWare ® Internet Services. If you already have configured LDAP server settings,
the printer uses this server automatically when you select LDAP as the network authentication or
authorization method. The printer only uses alternate LDAP servers for authorization and
personalization when primary LDAP server communication fails.
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select LDAP.
3. Click Add New.
4. Configure LDAP server settings, then click Apply.