Xerox WorkCentre 7835ii - Manual (Page 21)

Initial Setup
Xerox ® WorkCentre ® 7800/7800i Series Color Multifunction Printer 21
System Administrator Guide
Accessing Administration and Configuration
Settings
You can access the administration and configuration settings from the Tools tab on the control panel or
from the Properties tab in Xerox ® CentreWare ® Internet Services. The control panel consists of a touch
screen and buttons you press to control the functions available on the printer. Xerox ® CentreWare ®
Internet Services is the administration and configuration software installed on the embedded Web
server in the printer. It allows you to configure and administer the printer from a Web browser.
The administrator password is required when accessing locked settings in Xerox ® CentreWare ® Internet
Services or at the control panel. Most printer models have a default configuration that restricts access to
some settings. Access is restricted for settings on the Properties tab in Xerox ® CentreWare ® Internet
Services, and settings on the Tools tab on the control panel touch screen.
Accessing the Control Panel as a System Administrator
1. At the printer control panel, press the Log In/Out button.
2. Type admin and touch Next.
3. Type the administrator password, then touch Done.
Note: The default password is 1111.
Accessing Xerox ® CentreWare ® Internet Services as a System Administrator
Before you begin:
•
Locate your printer IP address using the Configuration Report. For details, see Printing the
Configuration Report on page 24.
• Ensure that TCP/IP and HTTP are enabled. If you disabled either of these protocols, enable them at
the control panel before accessing Xerox ® CentreWare ® Internet Services.
To log in to Xerox ® CentreWare ® Internet Services as the administrator:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In the top right area of the page, click Login.
3. Under User ID, type admin.
4. Under password, type the administrator password. The default password is 1111.
5. Click Login.