Xerox WorkCentre 7835ii - Manual (Page 67)

Network Connectivity
Xerox ® WorkCentre ® 7800/7800i Series Color Multifunction Printer 67
System Administrator Guide
Configuring SNMPv1/v2c
SNMP version 1 (SNMPv1) is the initial implementation of the SNMP protocol. SNMPv1 operates over
protocols such as User Datagram Protocol (UDP), IP, and Novell Internet Packet Exchange (IPX).
SNMPv2c includes improvements in performance, confidentiality, and manager-to-manager
communications over SNMPv1, however it uses the simple-community based security scheme of
SNMPv1.
1.
In Xerox ® CentreWare ® Internet Services, click Properties > Connectivity > Setup.
2. Under Protocol, next to SNMP, click Edit.
3. Click Edit SNMPv1/v2c Properties.
4. Under GET Community Name, type a name.
GET returns the password for the SNMP GET requests to the printer. Applications obtaining
information from the printer using SNMP, such as Xerox ® CentreWare ® Internet Services, use this
password.
5. Under SET Community Name, type a name.
SET returns the password for the SNMP SET requests to the printer. Applications that set
information on the printer using SNMP use this password.
CAUTION: Changes made to the GET or SET community names for this printer require corresponding
changes to the GET or SET community names for applications using SNMP.
6. Under TRAP Community Name, type a name.
Note: Use the Default TRAP Community Name to specify the default community name for all traps
the printer generates. Individual Trap Community Names specified for each trap destination
address can override the community name. Each Trap Community Name must be unique.
7. Click Save to apply the new settings or Undo to retain the previous settings.