Sony ILCA-99M2 - Manual (Page 66)

(A): Dedicated phase detection AF sensor (cross detection, F2.8-sensitive)
(B): Dedicated phase detection AF sensor (cross detection)
(C): Dedicated phase detection AF sensor
Hint
Set [Selectable AF Area] to [Only Cross-Type AF] to limit the auto focusing area to the Hybrid Cross
AF Points when the Hybrid Phase Detection AF is active.
Note
Only some of the 399 focus points in Hybrid Phase Detection AF are used in the following situation:
[Selectable AF Area] is set to [Only Cross-Type AF].
[Flexible Spot Points] is set to other than [All].
A lens that does not support Hybrid Phase Detection AF is attached.
A dedicated APS-C size lens is attached.
[APS-C/Super 35mm] is set to [On].
Digital zoom (Smart Telecon.)
In movie shooting mode
Continuous shooting with a large aperture value
[33] Shooting Auto focus
Focus Area
Selects the focusing area. Use this function when it is difficult to focus properly in the auto focus
mode.
Menu item details
Wide :
Focuses on a subject covering the whole range of the screen automatically. When you press
the shutter button halfway down in the still image shooting mode, a green frame is displayed
around the area that is in focus.
Zone :
Select a zone on the monitor on which to focus, and the product will automatically select a focus
MENU
→
(Camera Settings1)
→ [Focus Area] → desired setting.
1