Sony ILCA-99M2 - Manual (Page 287)

When using the flash to shoot bright scenes. (The maximum shutter speed is limited to the flash-
syncing speed of 1/250 seconds.)
When using the flash to shoot dark scenes with the [Flash Mode] set to [Fill-flash] or [Wireless].
(The minimum shutter speed is limited to the speed automatically determined by the camera.)
[301] List of MENU items Camera Settings1
Metering Mode
Selects the metering mode that sets which part of the screen to measure for determining the
exposure.
Menu item details
Multi:
Measures light on each area after dividing the total area into multiple areas and determines the
proper exposure of the entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the central area of the
screen (Center-weighted metering).
Spot:
Measures only the central area (Spot metering). This mode is suitable for measuring light on a
specified part of the entire screen. The size of the metering circle can be selected from [Spot:
Standard] and [Spot: Large]. The position of the metering circle depends the setting for [Spot
Metering Point].
Entire Screen Avg.:
Measures the average brightness of the entire screen. The exposure will be stable even if the
composition or the position of the subject changes.
Highlight:
Measures the brightness while emphasizing the highlighted area on the screen. This mode is
suitable for shooting the subject while avoiding overexposure.
Hint
When [Spot] is selected and [Focus Area] is set to either [Flexible Spot] or [Expand Flexible Spot]
while [Spot Metering Point] is set to [Focus Point Link], the spot metering point can be coordinated
with the focus area.
When [Metering Mode] is set to [Highlight] and the [D-Range Opt.] or [Auto HDR] function is
activated, the brightness and the contrast will be corrected automatically by dividing the image into
small areas and analyzing the contrast of light and shadow. Make settings based on the shooting
circumstances.
MENU
→
(Camera Settings1)
→ [Metering Mode] → desired setting.
1