Sony ILCA-99M2 - Manual (Page 110)

Hint
You can change the shutter speed and aperture (F-value) combination without changing the set
exposure value by rotating the front/rear dial while pressing the AEL button. (Manual shift)
Note
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered
Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the screen may differ from the actual image being shot.
[86] Shooting Selecting a shooting mode
Bulb shooting
You can shoot a trailing image of the movement of a subject with long exposure.
Bulb shooting is suitable for shooting trails of light, such as fireworks.
Settings2)
→ [Dial Setup].
You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value
automatically changes to achieve the appropriate exposure using the aperture value
and shutter speed you have set.
When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the ISO value you
have set is not suitable for appropriate exposure. If this happens, change the shutter
speed or aperture value.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the
exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.
Indicates under/over for appropriate exposure. It is displayed using a numerical value on the monitor
and with a metering indicator on the viewfinder. *
Adjust the focus and shoot the subject. 3
Set the mode dial to M (Manual Exposure). 1