Sony ILCA-99M2 - Manual (Page 236)

Menu item details
Select on This Device:
Selects an image on the product to be transferred to the smartphone.
(1) Select from among [This Image], [All Images on This Date] or [Multiple Images].
The options displayed may differ depending on the View Mode selected on the camera.
(2) If you select [Multiple Images], select the desired images using the center of the multi-
selector, then press MENU
→ [Enter].
Select on Smartphone:
Displays all images recorded on the product’s memory card on the smartphone.
Note
You can only transfer images that are saved on the camera's memory card.
You can only transfer images that are saved on the memory card in the memory card slot being
played back. To change which memory card slot is being played back, select MENU
→
(Playback)
→ [Select PB Media] → the desired slot.
You can select an image size to be sent to the smartphone from [Original], [2M] or [VGA].
To change the image size, refer to the following steps.
For Android smartphone
Start PlayMemories Mobile, and change the image size by [Settings]
→ [Copy Image Size].
For iPhone/iPad
Select PlayMemories Mobile in the setting menu, and change the image size by [Copy Image
Size].
Some images may not be displayed on the smartphone depending on the recording format.
RAW images are converted to JPEG format when they are sent.
You cannot send XAVC S or AVCHD format movies.
This product shares the connection information for [Send to Smartphone] with a device that has
permission to connect. If you want to change the device that is permitted to connect to the product,
reset the connection information by following these steps. MENU
→
(Wireless)
→ [Wi-Fi
Settings]
→ [SSID/PW Reset]. After resetting the connection information, you must register the
smartphone again.
When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set
[Airplane Mode] to [Off].