Epson TP1 - Manual (Page 90)

Operation 3. AUTO Mode
80 TP1 Rev.5
Jumping to a specified line in the program
(1) Move the cursor to “Line”, and press the key.
(2) The following screen appears.
Enter a numerical value at [Enter line number] to specify the line number.
(3) Move the cursor to the specified line.
Jumping to a “function” in the program file
(1) Move the cursor to [Function], and press the key.
(2) The following screen appears.
Move the cursor to the desired “function” and press the key.
The following screen appears during execution.
(3) The specified “function” screen appears.