Epson TP1 - Manual (Page 22)

Functions & Installation 3. Installation
12 TP1 Rev.5
3. Installation
3.1 Contents
TP1 (with cables) : 1 unit
Mode selector key : 2 units
3.2 Environmental Conditions
The Teach Pendant must be used in an environment that conforms to the following
requirements to ensure safe and reliable operation.
Item Condition
Ambient temperature 0 to 50 deg C (with minimal variation)
Ambient relative
temperature 5 to 95%
Protection structure IP65 (excluding the connector)
Environment - Keep away from dust, oily smoke, salinity, metal powder
and other contaminants.
- Keep away from flammable or corrosive solvents and
gases.
3.3 Operating Precautions
Do not drop the Teach Pendant or hit hard against other objects to avoid
damage, as the case of the Teach Pendant may be damaged since the main
body is made of resin.
Use the hand strap to prevent dropping the Teach Pendant during operation.
Do not hit the touch panel of the Teach Pendant against a hard object or put
excessive pressure on it. The touch panel is made of glass. Therefore, if
excessive pressure is put on it, it may be damaged.
Do not press or rub the surface of the front panel push buttons with a hard
object such as a tool. The surface of the buttons may be damaged as they are
easily scratched.
Wipe the dirt and oils adhering to the surface of the Teach Pendant display with
a soft cloth dampened with a neutral detergent or an alcohol solvent.
CAUTION
If using the mounting bracket, check that the bracket and screws are not bent or
loosened.