Epson TP1 - Manual (Page 49)

Operation 2. TEACH Mode
TP1 Rev.5 39
2.5 Executing I/O Commands
This section indicates settings in the [I/O Command] screen.
Press the key in the [Jog&Teach] screen.
The following screen appears.
2.5.1 Switching Input/Output Status Display
Press the key to switch between the “Inputs” status and the “Outputs” status
display.
2.5.2 Output Bit ON/OFF
(1) Press the key to display the “Outputs” status.
(2) Move the cursor to the output bit that you want to change.
(3) Switch the ON/OFF status of the output bit.
key: On
key: Off