Epson TP1 - Manual (Page 102)

Operation 3. AUTO Mode
92 TP1 Rev.5
Configure program editor
Set the preferences of the program editor.
(1) In the [Configuration] screen, move the cursor to [0 Editor], and press the key.
The setup screen appears.
To change an item:
Move the cursor to the left column.
To change item settings:
Move the cursor to the right column.
(2) Press the <↑> <↓> keys to move the cursor to the item and press the <→> key to
move the cursor to the right to confirm the item.
Press the <↑> <↓> keys to move the cursor to change the setting.
Changing the program edit area
Select the [Edit] and select the program edit area (Function, File).
Function : Set the area to a specific “function”.
File
: Set the area to the entire file.
Changing the tab width of the program editor
Select the [Tab Stop] and input the tab width (unit: character, 1 to 8).
Turning the keyword candidate display function of the program editor On/Off
Select the [Key Word] and select On/Off.
The default is “On”.
Turning the syntax help function of the program editor On/Off
Select the [Syntax Help] and select On/Off.
The default is “On”.
(3) When a setting has been changed, be sure to press the key to save the setting.
Pressing the key returns the setting to its default. The screen in step (1)
shows the defaults.
Press the key and the Controller reboots.