4 arm/tool/local/ecp, 1 changing arm no, 2 changing tool no – Epson TP1 User Manual

Page 48: 3 changing local no, 4 changing ecp no

Operation 2. TEACH Mode

TP1 Rev.5

2.4 Arm/Tool/Local/ECP

This section indicates settings in the [Arm/Tool/Local/ECP] screen.

Press the or key in the [Jog&Teach] screen.
The following screen appears.

When a value has been changed, press the key to apply the value, and be sure to
press the key to save the settings.

2.4.1 Changing Arm No.

(1)

Press the key and move the cursor to [Arm].

(2)

Set the arm number.

2.4.2 Changing Tool No.

(1)

Press the key and move the cursor to [Tool].

(2)

Set the tool number.

2.4.3 Changing Local No.

(1)

Press the key and move the cursor to [Local].

(2)

Set the local number.

2.4.4 Changing ECP No.

(1)

Press the key and move the cursor to [ECP].

(2)

Set the ECP No.