HEIDENHAIN iTNC 530 (340 49x-03) - Manual (Page 657)

HEIDENHAIN iTNC 530 657
12.8 Global Pr
ogr
a
m Set
tings (Sof
tw
ar
e Option)
Additional, additive datum shift
With the additive datum shift function you can compensate any
offsets in all active axes.
Superimposed mirroring
With the superimposed mirroring function you can mirror all active
axes.
8 In the global program settings form, move the cursor to MIRRORING
ON/OFF,
and use the SPACE key to activate the function.
8 With the downward arrow key, set the cursor to the axis that you
want to mirror.
8 Press the SPACE key to mirror the axis. Pressing the SPACE key
again cancels the function.
If you work with a mouse, you can select the desired axis directly by
clicking it.
The values defined in the form work in addition to the
values already defined in the program through Cycle 7
(datum shift).
Remember that may have to return to the contour after
activation of this function. The TNC then automatically
calls the return-to-contour menu after the form is closed
(see “Returning to the contour” on page 647).
The mirrored axes defined in the form work in addition to
the values already defined in the program through Cycle 8
(mirroring).
Remember that may have to return to the contour after
activation of this function. The TNC then automatically
calls the return-to-contour menu after the form is closed
(see “Returning to the contour” on page 647).